LY-16 Finished glasses measure
Product Name:
LY-16 Finished glasses measureModel No.:
LY-16Minimum Order:
1
Product Abstract:
Adjust PD to the left and the right at the same time.
- Product Description
Left and Right PD adjusted at same time
Product Abstract: This machine for measuring the finished glasses, with the ability of measuring a finished glasses' pupil height, pupillary distance, vertical angle and balance degree of spectacles frames. Features: ■ PD size can be adjusted left and right knob, ranges of measurement 50-80MM. ■ Directly to the glasses frame on the frame seat can be measure,convenient and quick operation Use Instructions: 1. Stably put the machine on a table. 2. Put the finished glasses with printed PD point in the machine for measurement. 3. Stahbly put the glasses on the machine, let bridge of your nose be opposite to the nose cushion on the instrument. 4. Adjust the frame active plate knobs on the instrument in order to make it closely contact with spectacles frames. Adjust the knobs until pupillary spot on the glasses is on the same level with the center spot on the instrument. 5. Adjust the right and left pupillary knobs to make the center spot of the instrument and top focus of the glasses overlap, then ready the pupillary distance scale, left is single pupillary distance and right is the glasses' pupillary distance. 6. Measurement of pupillary height is to check whether the left and right frame on the same scale line. Specification: Weight: 1.5kg Volume: 22(L)x15(w)x11.5(H)cm
- Related Products
- [Return Home] [Print] [Go Back]
Contact Us
Contact:
Mr. Li YiyangTel:
+86 15001978117Fax:
+86-21-50301363E-mail:
jiahe@jhoptical.com-
